Photonics
![]() Unique design of epoxies with good bonding strength and optical matching to allow optimum signal transition is always desired in this industry. The heat curable epoxies for fiber optic components that have adhesion on glass, metal, ceramic and most plastic substrates provide excellent thermal and moisture resistance. Application: Sealing fibers into ferrules, bonding optical fibers into connectors or/and ferrules, potting fiber bundles, V-groove array, chip bonding such as fiber media converters and transceiver modules assemblies |
||||||
Product Code
|
Special Features
|
Appearance
|
Cure (˚C/ Time)
|
Viscosity
(cP) |
Shelf Life
(month) |
Tg (˚C)
|
![]() |
|
White paste
|
12 minutes (Gel time) &
2 hours (Cure Time) at 100°C or 2 minutes (Gel time) & 30 minutes (Cure Time) at 150°C. |
24,000
|
12
|
122
|
![]() |
|
White paste
|
12 minutes (Gel time) &
2 hours (Cure Time) at 100°C or 2 minutes (Gel time) & 30 minutes (Cure Time) at 150°C. |
45,000
|
12
|
119
|
|
White paste
|
12 minutes (Gel time) &
2 hours (Cure Time) at 100°C or 2 minutes (Gel time) & 30 minutes (Cure Time) at 150°C. |
35,000
|
12
|
119
|
![]() Fast cure, high viscosity UV-curable epoxy system. Excellent flexibility, good toughness and good adhesion to a variety of substrates including metals and plastics. It has low odor and low skin and eye irritation potential. It does not contain volatiles and is very suitable for fiber optic applications. It is not inhibited by oxygen during UV cure, has low shrinkage, high gloss and good resistance to yellowing. The thixotropy has been adjusted to control excessive overflow.
Application: Sealing fibers into ferrules, bonding optical fibers into connectors or/and ferrules, potting fiber bundles, V-groove array, chip bonding such as fiber media converters and transceiver modules assemblies
|
||||||
Product Code
|
Special Features
|
Appearance
|
Cure (˚C/ Time)
|
Viscosity
(cP) |
Shelf Life
(month) |
Tg (˚C)
|
![]() |
|
Translucent liquid
|
1000mW/cm3, 3s 500mW/cm3, 6s 200mW/cm3, 15s
+ 120°C/30mins |
6,000
|
6
|
105
|
![]() |
|
Translucent
liquid
|
1000mW/cm3, 3s 500mW/cm3, 6s 200mW/cm3, 15s
|
6,000
|
6
|
86
|
|
Orange red liquid
|
500mW/cm3, 20s
+ 120°C/30mins |
16,000
|
6
|
91
|
![]() The 2-part casting epoxy is suitable for through hole LED (3/5mm, Oval & Flat-top), Super Flux and Snap LED. It has outstanding performance for outdoor applications such as automobile lightings, signals & indicators and traffic signal lights. Application: Automotive lighting & signal lamps, indicators for electronics devices, signboards, banners and traffic lights |
||||||
Product Code
|
Special Features
|
Appearance
|
Cure (˚C/ Time)
|
Mixed Viscosity
(cP at 25°C) |
Shelf Life
(month) |
Tg (˚C)
|
![]() |
|
Blue liquid
|
Pre cure 2 hours at 135°C
Post cure 8 hours at 150-160°C |
588
|
18
|
130
|
![]() |
|
Blue liquid
|
Pre cure 1 hour at 125°C
Post cure 2 hours at 135°C |
550
|
12
|
145
|
|
Blue liquid
|
Pre cure 1 hour at 125°C
Post cure 2 hours at 135°C |
800
|
12
|
141
|
|
|
Blue + yellow liquid
|
Pre cure 2 hours at 120°C
Post cure 2 hours at 150°C |
550
|
12
|
135
|
![]() The high brightness silicone has the advantage of low thermo-mechanical stress and high thermal & radiation resistance. It has a wide range of refractive index ranging from 1.41 to 1.55. It is suitable for COB type in-door and out-door commercial and architectural lighting. Application: Commercial lighting, Architectural lighting, Indoor/Outdoor lighting & signboard |
||||||
Product Code
|
Special Features
|
Appearance
|
Cure (˚C/ Time)
|
Mixed Viscosity
(cP at 25°C) |
Shelf Life
(month) |
Refractive Index (RI)
|
|
Transparent liquid
|
Pre cure 5 minutes at 120°C
Post cure 3 hours at 150°C |
11,000
|
12
|
1.53
|
|
|
Transparent liquid |
3 hours at 170°C
|
4,375
|
12
|
1.54
|
|
|
Transparent liquid |
Pre cure 1hour at 40°C
Post cure 1 hours at 120°C and 2 hours at 150°C |
4,613
|
12
|
1.54
|
|
|
Transparent liquid |
Pre cure 1 miniute at 150°C
Post cure 2 hours at 150°C |
8,300
|
12
|
1.41
|
|
|
Transparent liquid |
2 hours at 160°C
|
3,000
|
12
|
1.41
|
![]() The SMD/PLCC epoxy and silicone are designed with good heat and UV resistance that meets MSL2 requirements. It can be used as backlighting in LCD panel for TV, hand phone and tablets. It is also commonly used in architectural and automotive lighting. Application: Backlighting for display panels (LED TV, mobile phone and tablets), Architectural lighting, Outdoor display panel and General lighting |
||||||
Product Code
|
Special Features
|
Appearance
|
Cure (˚C/ Time)
|
Mixed Viscosity
(cP at 25°C) |
Shelf Life
(month) |
|
|
Clear liquid | Pre cure 2 hours at 120°C Post cure 2 hours at 150°C |
825 | 12 | ||
|
Clear blue liquid
|
Pre cure 2 hours at 120°C
Post cure 2 hours at 150°C |
820
|
12
|
||
![]() |
|
Clear liquid | Pre cure 2 hours at 120°C Post cure 2 hours at 150°C |
2,250 | 12 | |
|
Transparent liquid
|
2 hours at 160°C
|
3,000
|
12
|
||
|
Transparent liquid
|
3 hours at 170°C
|
4,375
|
12
|
||
|
Transparent liquid
|
Pre cure 1hour at 40°C
Post cure 1 hours at 120°C and 2 hours at 150°C |
4,613 |
12
|
![]() The potting epoxy has low thermo-mechanical stress that makes it suitable for large display module like the S4 (7-segment display) for counters and digital instruments. Application: S4 (seven Segment Display) for counters and digital instruments |
||||||
Product Code
|
Special Features
|
Appearance
|
Cure (˚C/ Time)
|
Mixed Viscosity
(cP at 25°C) |
Shelf Life
(month) |
Tg (˚C)
|
|
Blue + clear liquid
|
Pre cure 1 hour at 115°C
Post cure 2 hours at 125°C |
1,450
|
12
|
140
|